Capacity:84CBM
Engine: DIESEL ENGINE
Size:13600×2,440×2,590(mm)
Trailer Chassis: High tensile steel
Axle: 3 axles each axle has 12ton lifting capacity
Landing Gear: 2 units mechanic type stabilization legs
Description
The CSCTRUK Semitrailer Hydraulic Garbage Compactor is specifically designed for the transfer of waste from inner city locations and intermediate stations to long-distance solid waste storage areas. This type of semi-trailer is available with loading capacities ranging from 40 m³ up to 90 m³ and is commonly referred to as a Waste Transfer Semi Trailer or Garbage Compactor Semi-Trailer.
The compactor garbage truck tank upper body is mounted on a 3-axle trailer chassis and features a tank made of high-strength, wear-resistant steel plates. Other components include a hopper composed of sliding plates, a sweeping panel for garbage collection and compaction, a hydraulically opening tailgate, and a garbage bin tipper. The Semitrailer Hydraulic Garbage Compactor can be controlled from the cab-in control, manual control, and push-button control.
SPECIFICATION
|
DEFINITION |
Net 84m3 (97+2m3) capacity Rear loading semitrailer hydraulic garbage compactor. Dimension: 13.6m x 2.44 m x 2. 59 m |
|
CONSTRUCTION |
Semi-Trailer chassis (subframe) Body Tailgate (rear hopper) Ejection/discharging Plate Diesel Power Unit |
|
CAPACITY |
Net Volume/capacity: 84 m3 – Total volume is 99 m3. Tailgate 2m3 |
|
BODY STEEL |
Floor/SIDE WALLS: 6mm; Roof: 4mm; UN LOADING PLATE FRONT SURFACE: 6mm |
|
TAILGATE (REAR HOPPER) |
Tailgate Floor, rear hopper floor extension inside body and side wall. Other areas from 6mm steel The tailgate is connected to the body with top hinges and opened upwards by means of two units double acting hydraulic cylinders |
|
COMPACTION RATIO |
The compaction ratio (volumetric) varies between 3: I- 6: 1 according to the characteristic and density of the garbage used in the area (above mentioned parameter is valid for household garbage) |
|
HOPPER CAPACITY |
The garbage capacity of the loading hopper is around 2m3 |
|
COMPACTION PLATE |
The inner surface of the compaction plate where garbage fabrication and compression occur is from 10mm wear-resistant steel. |
|
SEALING |
With a special design leak-proof rubber sea between the tailgate and the body |
|
LOCKING |
Hydraulic locking by means of reverse action of two hydraulic tailgate-lifting cylinders. |
|
SAFETY PROPS |
The tailgate is provided with safety props (manual) between the body and tailgate for safety purposes during maintenance |
|
SAFETY VALVE |
Equipped with an anti-dropping safety valve on the tailgate and hydraulic lines to prevent sudden falls. |
|
CONTROL |
All devices for loading control arc mounted on tailgate right side. The compaction mechanism can be operated electrically (automatically) via push buttons + mechanically (manual) via a hand lever. Control the tailgate (opening and closing) and forward + backward movement or the ejection plate is from the rear left side of the body. The container lifting mechanism is only by a manual control (hand lever). |
|
DISCHARGE OF GARBAGE |
The unloading cycle will last a minimum of 4 minutes and 30 seconds. Ejection Plate: The movement of discharging plate (panel) will be step by step in a progressive method (in stages) and will be designed against maximum 190 bar working pressure. The average working pressure is 170 bar. Locking Cylinder 063 mm x 035 mm 2 units. Locking Cylinder Working Pressure 80 bar. Ejection plate Main Cylinder 0160 mm x 0100 mm. |
|
HYDRAULIC COMPONENTS |
FRONT DIRECTION CONTROL VALVE (Front Distributor) MAIN SAFETY VALVE. HYDRAULIC CYLINDERS / all arc hydraulic and double-acting. The dimensions of the cylinders’ arc are designed to accomplish the stipulated cycle times and compaction ratio. Hydraulic cylinder pipes & bores included. HYDRAULIC HOSES / All high-pressure hydraulic oil hoses have an app. burst rating 4 times more than the specific system working pressure. |
|
TRAILER CHASSIS |
Trailer Chassis: From” H” profile steel Kingpin: In accordance with standard 3 Axles: Each axle has a 12tons lifting capacity Brake System: WABCO ABS braking system Landing Gear: 2 units’ mechanical type Tyre: 385/65 R22.5 |
